Honda CBR250R Owner's Manual page 93

10/11/05 11:28:20 32KYJE00_093
Improper installation of the oil filter can
cause serious engine damage.
6. Install the oil filter spring into the oil filter
cover. Then, install the new gasket and
oil filter cover.
Make sure the oil filter cover bolts are
tightened securely to the specified torque.
Oil filter cover bolts torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
7. Check that the sealing washer on the
drain bolt is in good condition and install
the bolt. Replace the sealing washer
every other time the oil is changed, or
each time if necessary.
Engine oil drain bolt torque:
24 N·m (2.4 kgf·m , 18 lbf·ft)
8. Fill the crankcase with the recommended
grade oil; approximately:
1.5 (1.6 US qt , 1.3 Imp qt)
9. Install the oil fill cap.
10. Start the engine and let it idle for 3 5
minutes.
11. 2 3 minutes after stopping the engine,
check that the oil level is at the upper
level mark in the inspection window with
the motorcycle upright on firm, level
ground. Make sure there are no oil leaks.
83