Clutch - Honda CBR250R Owner's Manual

10/11/05 11:22:56 32KYJE00_039

CLUTCH

Clutch adjustment may be required if the
motorcycle stalls when shifting into gear or
tends to creep; or if the clutch slips, causing
acceleration to lag behind engine speed.
Minor adjustments can be made with the
clutch cable adjuster ( ) at the clutch lever
( ). 2
Normal clutch lever freeplay is:
10 20 mm (0.4 0.8 in)
(2)
(2) Clutch lever
1. Pull back the rubber dust cover ( ).
2. Loosen the lock nut ( ) and turn the
clutch cable adjuster. Tighten the lock
nut and check the adjustment.
3. If the adjuster is threaded out near its
limit or if the correct freeplay cannot be
1 obtained, using the clutch cable adjuster,
loosen the lock nut and turn in the clutch
cable adjuster completely. Tighten the
lock nut and install the rubber dust cover.
(1) Clutch cable adjuster
(3) Rubber dust cover
(4) Lock nut
3
4
(4)
(3)
(B)
( ( A A ) )
(1)
(A) Increase freeplay
(B) Decrease freeplay
29