Communication
Installing communication options and control
terminals
Item
1
2
3
4
5
6
7
8
9
10
To install the communication options and control terminals:
Install the appropriate option card and/or necessary cable(s).
1.
Connect the cables to the appropriate locations.
2.
For detailed information, see "Communication options (on page 75)" or "Control terminals (on page
76)."
Route and tie the cable(s) out of the way.
3.
Power up the UPS.
4.
Description
Signal input 1
Signal input 2
Standalone/parallel
REPO (normally open)
REPO (normally closed)
DB-9 communication port
Redundant signal wiring (for parallel use only)
Relay output contacts
Option card bay 1
Option card bay 2
Communication 74