Download Print this page

HP R1500 Product End-Of-Life Disassembly Instructions

Hide thumbs Also See for R1500:

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Other Products
Marketing Name / Model
[List multiple models if applicable.]
HP R1500 G4 NA UPS
HP R1500 G4 JP/TWN UPS
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries Lead-acid battery
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Electrolytic Capacitors
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
3
0
0
0
0
3
2
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HP R1500

  • Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable)
  • Page 3 1. Remove the middle bezel and left panel. 2. Disconnect the battery connector, and press on/off button to discharge the rest electricity. EL-MF877-00 Page 3 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 4 Press on/off button to discharge rest electricity 3. Loosen the screws fixing the battery door, remove the battery door, and pull out the battery. M3 Cross driver EL-MF877-00 Page 4 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 5 4. Loosen the screws fixing the right panel ASSY, and remove the right panel ASSY. M3 star driver EL-MF877-00 Page 5 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 6 5. Disconnect the LCD cable and PCBA. M3 cross driver EL-MF877-00 Page 6 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 7 6. Loosen the screws fixing the top cover, and remove the top cover. M3 Star driver EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 8 7. Disconnect the cables connecting to Slot box, AVR, rear FAN, COM PCBA, and rear panel ASSY, and disassemble the cable clips sticking on the mainframe, and loosen the screws fixing the main PCBA, then remove the main PCBA . Disconnect all terminal M4 Cross Screw driver EL-MF877-00...
  • Page 9 M3 Cross driver EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at EL-MF877-01...
  • Page 10 8. Cut off the cable tie, disconnect the cable connecting to COM PCBA, loosen the nuts fixing the AVR, and then remove the AVR. Cut off the cable tie Nut driver 9. Loosen the screws fixing rear panel ASSY, and then remove the rear panel ASSY. EL-MF877-00 Page 10 Template Revision B...
  • Page 11 M3 Star driver 10. Remove the RPO connector, loosen the screws fixing Slot box, COM PCBA, and rear FAN, loosen the nut fixing ground cable and then remove the Slot box, COM PCBA, and rear FAN, outlet. M3 Star driver M4 Cross driver Press these clip and push out EL-MF877-00...
  • Page 12 Nut driver M3 Cross driver EL-MF877-00 Page 12 Template Revision B PSG instructions for this template are available at EL-MF877-01...