Changing User Settings - HP R1500 - UPS XR User Manual

NOTE:
Main menu
UPS Status
Event Log
Measurements
Control
Settings
Identification
Turn UPS On/Off

Changing user settings

Description
Set Date and Time
Display Contrast
Change Language
Menu functions related to parallel systems appear only on paralleled UPSs.
Submenu
Parallel system
Output
Battery
Input
Load Receptacle
Go to Bypass mode
Start Battery Test
Display Test
User Settings
Service Settings
On and Off Option
Available settings
Set Year, Month, Day
Date: mm/dd/yyy
Set Hours, Minutes
Time is a 24-hour clock
Adjust contrast with up/down arrow
buttons
Set Language
Display information or menu function
System Normal | High Efficiency Power: % /
Battery Resting | Battery Floating UPS in Parallel
mode / Parallel Unit Number x / Units on Bus
Bar / Units on Load
Displays up to 100 events and alarms
kW (by unit) / kW (Parallel total)
Voltage L-N and L-L / Current / Frequency /
Power kW / Power kVA / Power pf
Voltage / Current / Runtime
Voltage L-N and L-L / Current / Frequency
Voltage / Current / Power kW / Power kVA /
Frequency
Transfers the UPS system to internal Auto-Bypass
mode
When this command is active, the option
changes to Go to Normal mode.
Schedules a battery test. The battery test might
not start immediately.
Four different selectable tests for the front panel
functions:
•
The LEDs cycle through
•
The alarm sounds
•
The backlight turns off and on
•
The pixels scroll through to test the LCD
For more information, see "Changing user
settings (on page 68)."
Not available
UPS Type / Part Number / Serial Number /
Firmware / Display / System / Parallel Card
UPS On / UPS Off / System On / System Off
Default setting
01/01/2003
00:00
Moderate
English
UPS operations 68