Removing; Installing - Invacare Pronto M91 User Manual

Removing

1. Remove the quick release pin that secures the footboard assembly
to the wheelchair frame by depressing the button while sliding the
pin out.
2. Remove the footboard assembly from the wheelchair frame.

Installing

WARNING
Make sure the detent balls of the quick release pin
are fully released and protruding past the outer
edge of the tube before operating the wheelchair.
Otherwise, injury and/or damage may result.
Keep detent balls clean.
1. Position the footboard assembly onto the wheelchair frame so that
the mounting hole in the wheelchair frame aligns with the desired
mounting hole in the footboard assembly.
2. Install the quick release pin by depressing the button while sliding
the pin in. Ensure that the detent balls of the quick release pin are
fully released and protruding past the outer edge of the tube
(Detail "A").
Part No 1143153
Wheelchair
Frame
Mounting
Hole
Three Depth
Adjustment
Holes
Quick
Detent
Release Pin
Ball
DETAIL "A" - BOTTOM VIEW OF FOOTBOARD
Quick Release Pin
Outer Edge of
Tube
FIGURE 5
97
8 SETUP/MAINTENANCE
Detent Balls
Removing/Installing the Footboard
Assembly
Invacare® Pronto® M91™
Footboard
Assembly