Spj+, Spj+ W/Pss And Spj+ W/Acc Joysticks; Cmpj+ Joystick - Invacare Pronto M91 User Manual

5 WHEELCHAIR OPERATION

SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks


For this procedure, refer to FIGURE 10.
The Information Gauge Display located on the front of the joystick
housing, it provides the state-of-battery charge, including notification of
when the battery requires charging. It also provides the following
information to the user on the status of the wheelchair:
A. GREEN LEDs are lit, indicating well charged batteries.
B. AMBER LEDs are lit, indicating batteries are moderately
charged. Recharge batteries before taking a long trip.
C. RED LEDs are lit, indicating batteries are running out of
charge. Recharge batteries as soon as possible.

CMPJ+ Joystick


For this procedure, refer to FIGURE 11.
The far right side of the display screen is the Battery Gauge Display
(BGD). It provides information on the remaining charge in the batteries.
At full charge, solid blocks fill in battery gauge. As the battery becomes
discharged, the segments will progressively disappear starting on the
right and moving towards the left a bar at a time until no segments
appear. At this level the user should charge the batteries as soon as
possible.
Invacare® Pronto® M91™
Batteries
Empty
FIGURE 10 SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks
Display Screen
FIGURE 11
56
Information Gauge Display
Batteries Full
Battery Charger/
Programming Port
Battery Gage
Display
Batteries Empty
CMPJ+ Joystick
Part No 1143153
Batteries Full