Reaching, Bending - Backward - Invacare Pronto M91 User Manual

2 SAFETY

Reaching, Bending - Backward

WARNING
DO NOT lean over the top of the back
upholstery. This will change your center of gravity
and may cause you to tip over.
Proper positioning is essential for your safety.
When reaching, leaning, bending or bending
backward, it is important to use the casters as a
tool to maintain stability and balance.

For this procedure, refer to FIGURE 5.
Position wheelchair as close as possible to the desired object. Point the
front and rear casters rearward to create the longest possible
wheelbase, engage the motor locks and turn power off. Reach back only
as far as your arm will extend without changing your sitting position.
Invacare® Pronto® M91™
FIGURE 5
28
Reaching, Bending - Backward
Part No 1143153