Footplates And Front Rigging - Invacare Pronto M91 User Manual

2 SAFETY

Footplates and Front Rigging

WARNING
If the wheelchair dips forward and the footplates touch the ground while the wheelchair is in motion, please contact your
dealer for an inspection and avoid use of the wheelchair if possible. Otherwise the user could be injured.
ALWAYS maintain a minimum of 3-inches between bottom of the front riggings and the floor/ground while the wheelchair
is in motion to ensure proper ground clearance. If necessary, adjust the front rigging height or tilt seat to achieve proper
ground clearance.
When determining the depth of the telescoping front frame tubes, make sure the rear of the footrests DO NOT interfere
with the movement of the front casters. Otherwise damage to the wheelchair may result or may impede proper operation.
DO NOT use the footplates/footboard as a platform. When getting in or out of the wheelchair, make sure that the
footplates are in the upward position or swing footrests towards the outside of the wheelchair.
Make sure detent balls of the quick-release pin are fully released before operating the wheelchair.
Keep detent balls clean.
Invacare® Pronto® M91™
26
Part No 1143153