Logging On To The Onboard Administrator Gui; Running The Setup Wizard - HP Integrity Superdome 2 16-socket User Manual

Logging on to the Onboard Administrator GUI

Enter the user name and initial administration password for your HP Superdome 2 Onboard
Administrator account found on the tag attached to the Onboard Administrator.
Possible issues that might occur when logging in include:
Entering the information incorrectly. Passwords are case-sensitive.
The account information entered not being set up for HP Superdome 2 Onboard Administrator.
The user name entered has been deleted, disabled, or locked out.
The password for the account requiring to be changed.
Attempting to log on from an IP address that is not valid for the specified account.
The password for the Administrator account being forgotten or lost. To reset the Administrator
password, see
If you continue to have problems signing in, contact your administrator.

Running the setup wizard

To run the setup wizard, log on to Onboard Administrator. The First Time Setup Wizard starts
automatically when you log on to Onboard Administrator for the first time. This wizard assists you
in setting up the functions of the Onboard Administrator. You can access the setup wizard at any
time after initial setup by clicking the Wizards link on the top left of the center screen.
"Recovering the administrator password" (page 17).
Logging on to the Onboard Administrator GUI 15