Directory Settings Screen - HP Integrity Superdome 2 16-socket User Manual

On this screen, you can configure directory groups.
For possible values and descriptions of each box, see

Directory Settings screen

Use the Directory Settings screen to set directory access for the now selected enclosures.
Using the Directory Settings screen, you can configure the following settings:
Enable LDAP Authentication: Enables a directory server to authenticate a user login.
Enable Local Users: Enables a user to log on using a local user account instead of a directory
account.
Box
Directory Server Address
Directory Server SSL Port
Search Context 1
Search Context 2
Search Context 3
Use NT Account Name Mapping (DOMAIN\username): Enables NT name mapping so that
you can enter the NT domain and user name.
Possible value
###.###.###.### where ### ranges
from 0 to 255 or DNS name of the
directory server or the name of the domain
0 to xxxx
All characters except " (quotes), not to
exceed 128 characters
All characters except " (quotes), not to
exceed 128 characters
All characters except " (quotes), not to
exceed 128 characters
"Directory Groups" (page
Description
The IP address or the DNS name or the
name of the domain of the directory service
The port used for LDAP communications.
The default port is port 636
First searchable path used to locate the user
when the user is trying to authenticate using
directory services
Second searchable path used to locate the
user when the user is trying to authenticate
using directory services
Third searchable path used to locate the
user when the user is trying to authenticate
using directory services
Directory Settings screen
149).
49