Testing The Directory Login Solution; Troubleshooting Ldap On Onboard Administrator - HP Integrity Superdome 2 16-socket User Manual

Testing the directory login solution

1. Log out of the current Onboard Administrator session, and then close all browser windows.
2. Browse to the Onboard Administrator, and then log in using one of the following options:
Test Admin
TestAdmin@domain.com
DOMAIN\Test Admin
3. Enter the corresponding password used for the user account. If you cannot log in with full
Administrative privileges, see
NOTE:
Allen and your account is jallen, you cannot login as jallen because this format is not now
supported by LDAP.
4. Log off or sign out of Onboard Administrator, and then attempt to log in as Test Operator
using one of the following options:
Test Operator
TestOperator@Domain.com
DOMAIN\Test Operator
Enter the password used for the account. If this process succeeds, then the account has no access
to any server blades, but full access to interconnect bays.

Troubleshooting LDAP on Onboard Administrator

To be sure that SSL is working on the Domain Controllers in your domain, open a browser and
then navigate to https://<domain_controller>:636 (substitute your Domain Controller for
<domain_controller>). You can substitute <domain> in place of <domain controller>,
which goes to DNS to verify which Domain Controller is now answering requests for the domain.
Test multiple Domain Controllers to be sure that all of them have been issued a certificate. If SSL
"Troubleshooting" (page
You cannot login using your user name. For example, if your Account name is Jeff
169).
Testing the directory login solution 185