IMPORTANT:
Administrator. To correctly set up the Door display, you must select the current complex configuration
present in the rack.
Press Next.
Status display preferences
Temperature Scale—Select between displaying enclosure temperatures in °C or °F.
Display IP Address—Select to enable or disable the display of the IP addresses of the active
Onboard Administrator and the complex service port.
NOTE:
Press Next to continue.
Two 16s complex setup
If the complex configuration is 2 16s complexes in a Cabinet, unlike the other multi-enclosure
configurations, each enclosure is a self-contained complex and each will require its own login and
password information.
34
HP Superdome 2 Door Status Display
This menu selection does not set the complex configuration on the Onboard
The OA IP address does not appear until the setup process is complete.