HP Integrity Superdome 2 16-socket User Manual page 81

Diagnostic information
Diagnostic information is gathered by polling a device microcontroller (resulting in a degraded
status if a failure has occurred), or is sent by the device microcontroller, without being polled to
report a failure.
Item
Device Identification Data
Device Operational
Device Indictment
Table 7 Subsystems and Devices information
Table
Device Bay Overview
All Device Bays
Interconnect Bay Overview
All Interconnect Bays
X–Flex Bay Overview
All XFM Bays
GPSM Bay Overview
All GPSM Bays
Power Subsystem
System Status
Power Supply Summary
All Power Supplies
Thermal Subsystem
System Status
Fan Overview
All Fans
NOTE: If any subsystem contains a component with a status other than OK, all components of
that subsystem with a status other than OK are displayed inline.
Description
Contains information on model name, part number, serial number, and other information
used to identify the device. This data is also called FRU data. Device identification data
error displays if the data is not present or not readable by the Onboard Administrator.
Possible values are OK or Error. View the syslog for errors. Possible reasons for the error
are mismatched firmware or a software or hardware failure.
Indicates if the device has been indicted by the Superdome 2 Analysis Engine.
Description
The overall status of all device bays. Possible values are Unknown, OK, Degraded, and
Failed.
The overall status of the interconnect bays. Possible values are Unknown, OK, Degraded,
and Failed.
The overall status of the XFM bays. Possible values are Unknown, OK, Degraded, and
Failed.
The overall status of the GPSM bays. Possible values are Unknown, OK, Degraded, and
Failed.
The overall status of the Power Subsystem of the enclosure. Possible values are Unknown,
OK, Degraded, and Failed.
The overall status of the power supplies. Possible values are Unknown, OK, Degraded,
and Failed.
The overall thermal status of the enclosure. Possible values are Unknown, OK, Degraded,
and Failed.
The overall status of the fans. Possible values are Unknown, OK, Degraded, and Failed.
Enclosure settings 81