Processor; Memory - HP Carrier-grade cc2300 Product Manual

Processor

The server board accommodates one or two Intel® Xeon™ 2.4 GHz/512 KB L2 cache processors. This
processor uses the 0.13-micron technology.

Memory

The server board has six 168-pin DIMM slots, each supporting 72-bit ECC registered DDR DIMMs (DDR266
compatible). Memory is partitioned in three banks. A minimum of 512 MB (256 MB x2) and as much as 12
GB may be installed.
DIMMs must be installed in groups of 2 (pairs),
and in specific locations. DIMM sockets (slots) are shown
Figure 2-5
in . The first pair (2 DIMMs) must be installed in slots 1B and 1A. The second pair must be
installed in slots 2B and 2A. The third (and final) pair must be installed in slots 3B and 3A. If DIMMs of
different sizes are to be installed, the smallest DIMMs (least memory) must be installed as the first pair.
DIMMs in the second pair can be equal to or larger (more memory) than the DIMMs of the first pair. If
DIMMs are to be installed in the third pair, they must be equal to or larger than the DIMMs of the second
Refer to Memory in Chapter 1
pair.
Chapter 8 89