Chapter 4 Adjustments; Adjusting The Home Position Of The Front Brake Lever; Adjusting The Home Position Of The Brake Pedal; Adjusting The Home Position Of The Clutch Lever - Beta RR 250 Owner's Manual

4
ADJUSTING THE HOME
POSITION OF THE FRONT
BRAKE LEVER
The home position of brake lever 2 can be
adjusted by means of screw 1.
1
2
ADJUSTING THE HOME
POSITION OF THE BRAKE
1
PEDAL
The home position of brake pedal 1 can
2
be altered by turning adjusting screw 3 af-
ter loosening the counternut located under
dust cap 2. Loosen the counternut and turn
3
the adjusting screw until the desired height
is obtained. Retighten the counternut after
completing the operation.
ADJUSTING THE HOME
2
POSITION OF THE CLUTCH
LEVER
The adjustment screw 1 allows adjustment
1
of the distance of lever 2 from the knob.
The empty run is recovered automatically.
ADJUSTING THE
1
HANDLEBARS
2
3
The lower bracket 1 can be mounted on
the holes nr. 2, 3 or 4 respectively, while
2
the handlebar can be rotated by 180° in
order to meet the driver's specifi c driving
4
3
needs.
4
GB
57