HP 6125XLG Command Reference Manual page 5

Views
Any view
Parameters
vpn-instance vpn-instance-name: Specifies the name of a VPN instance, a string of 1 to 31 case-sensitive
characters.
group-name: Specifies the name of a BGP peer group, a string of 1 to 47 case-sensitive characters. If no
peer group is specified, this command displays information about all peer groups.
Examples
# Display information about all BGP peer groups for VPN instance vpn1.
<Sysname> display bgp group ipv4 vpn-instance vpn1
BGP peer group: grp1
Remote AS number: Not specified
Type: external
Members:
10.1.1.1
BGP peer group: grp2
Remote AS: 100
Type: internal
Members:
1.1.1.1
# Display information about the BGP VPNv4 peer group grp1 for VPN instance vpn1.
<Sysname> display bgp group ipv4 vpn-instance vpn1 grp1
BGP peer group: grp1
Remote AS number: Not specified
Type: external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180 seconds
Keepalive timer value: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0
Routing policy configured:
No routing policy is configured
Members:
Peer
10.1.1.1
Table 1 Command output
Field
BGP peer-group
remote AS number
AS MsgRcvd MsgSent OutQ PrefRcv Up/Down
10 0
Description
Name of the BGP VPNv4 peer group.
Number of the remote AS.
2
0 0 0 00:01:02 Connect
State