Ipv6-Family - HP 6125XLG Command Reference Manual

Field
Threshold
Minimum time between
advertisements
Optional capabilities
Peer Preferred Value
# Display log information about BGP IPv6 peer 1::2 in the VPN instance vpn1.
<Sysname> display bgp peer ipv6 vpn-instance vpn1 3::3 log-info
Peer : 3::3
Date
27-Mar-2011 15:36:12 Down
27-Mar-2011 15:34:29 Up
Table 8 Command output
Field
Peer
Date
Time
State
Notification
Error/SubError

ipv6-family

Use ipv6-family to create and enter IPv6 VPN view.
Use undo ipv6-family to remove all configurations in IPv6 VPN view.
Syntax
ipv6-family
undo ipv6-family
Views
VPN instance view
Description
Percentage of received routes from a peer to maximum routes allowed
to learn from the peer. If the percentage is reached, the system
generates alarm messages.
Minimum route advertisement interval in seconds.
Optional capabilities supported by the local end.
Preferred value specified for the routes from a peer.
Time State Notification
Error/SubError
Receive notification with error 6/4
Cease/Administrative Reset
Description
IP address of the peer.
Date on which the Notification was sent or received.
Time at which the Notification was sent or received.
BGP session state:
•
Up—The BGP session is in Established state.
•
Down—The BGP session is down.
Error code of the Notification, indicating the cause of why the BGP session is down.
•
Error—Refers to the error code, which identifies the type of the Notification.
•
SubError—Refers to the error subcode of the Notification, which identifies specific
information about the reported error.
21