Download Print this page

HP 6125XLG Command Reference Manual: Vpn-instance-capability Simple; Vpn-target

R2306-hp 6125xlg blade switch mce command reference.
Hide thumbs

Advertisement

[Sysname] ip vpn-instance vpn2
[Sysname-vpn-instance-vpn2] route-distinguisher 100:2
[Sysname-vpn-instance-vpn2] ipv4-family
[Sysname-vpn-ipv4-vpn2] routing-table limit 1000 simply-alert

vpn-instance-capability simple

Use vpn-instance-capability simple to disable routing loop detection for a VPN OSPF process.
Use undo vpn-instance-capability to restore the default.
Syntax
vpn-instance-capability simple
undo vpn-instance-capability
Default
Routing loop detection is enabled for a VPN OSPF process.
Views
VPN OSPF process view
Predefined user roles
network-admin
Examples
# Disable routing loop detection for the OSPF process 100 in the VPN vpna.
<Sysname> system-view
[Sysname] ospf 100 vpn-instance vpna
[Sysname-ospf-100] vpn-instance-capability simple
vpn-target
Use vpn-target to configure route targets for a VPN instance.
Use undo vpn-target to remove the specified or all route targets of a VPN instance.
Syntax
vpn-target vpn-target&<1-8> [ both | export-extcommunity | import-extcommunity ]
undo vpn-target { all | vpn-target&<1-8> [ both | export-extcommunity | import-extcommunity ] }
Default
No route targets are specified for a VPN instance.
Views
VPN instance view, IPv4 VPN view, IPv6 VPN view
Predefined user roles
network-admin
Parameters
vpn-target&<1-8>: Specifies route targets. &<1-8> means that you can specify up to eight route targets.
15

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: