Download Print this page

HP 6125XLG Command Reference Manual: Domain-id

R2306-hp 6125xlg blade switch mce command reference.
Hide thumbs

Advertisement

Ipv6-family:
Export VPN Targets :
2:2
Import VPN Targets :
2:2
Maximum Routes Limit : 2000
Threshold Value(%): 50
Table 4 Command output
Field
Interfaces
Ipv4-family
Ipv6-family
Export VPN Targets
Import VPN Targets
Threshold Value(%)

domain-id

Use domain-id to configure an OSPF domain ID.
Use undo domain-id to restore the default.
Syntax
domain-id domain-id [ secondary ]
undo domain-id [ domain-id ]
Default
The OSPF domain ID is 0.
Views
OSPF view
Predefined user roles
network-admin
Parameters
domain-id: Specifies an OSPF domain ID in one of the following formats:
Integer, in the range of 0 to 4294967295. For example, 1.
Dotted decimal notation. For example, 0.0.0.1.
Dotted decimal notation:16-bit user-defined number in the range of 0 to 65535. For example,
0.0.0.1:512.
secondary: Specifies the domain ID as secondary. Without this keyword, the domain ID is primary.
Description
Interface to which the VPN instance is bound.
IPv4 VPN information.
IPv6 VPN information.
Export route target attribute of the VPN.
Import route target attribute of the VPN.
Threshold for warning. When the percentage of the number of the received
route prefixes to the maximum number of routes supported reaches this
value, the device generates a prompt.
If no threshold is configured, this field is not displayed.
6

Advertisement

   Related Manuals for HP 6125XLG

Comments to this Manuals

Symbols: 0
Latest comments: