Chapter 4. Monitoring; Main Screen; Single Image In Full Screen; Multi Screen - Samsung SVR-1680 User Manual

User Manual

Chapter 4. Monitoring

When turned on, the DVR will display visual data from all analog channels on the screen in its
monitoring mode. This chapter explains how to use all monitoring modes offered by the DVR.
4.1

Main Screen

-
The DVR will turn on when connected with an
adequate power source.
-
All LEDs will turn on and off during the bootup
process.
-
After bootup, the screen will be displayed in the
16 partition mode. (SVR-960/945 : 9 partition)
※ If passworded, a login window will appear.
4.2

Single image in full screen

-
Press the desired channel button or left-click
the desired channel partition.
-
Press [MULTI] button or left-click again to return
to the partition screen.
4.3

Multi Screen

-
To see several channels simultaneously, press [MULTI] button or left-click Division Mode
in the function menu and select the desired partition mode.
-
Pressing [MULTI] will cycle the partition mode (4A, 4B, 4C, 4E, 9A, 9B, 10A, 16). SVR-
960/945 support 4A, 4B, 4C, 4E, 9A and 9B partition modes.
4.4

User Sequence

Once all slots in the user sequence option has been filled or the desires channels have been
selected, press [AUTO] button on the front side or click
sequence, press [AUTO] button on the front side or click
If the user sequence has not been set up, pressing [AUTO] button will not
initiate a user sequence.
in the function menu. To end user
in the function menu again.
24