Samsung SVR-1680 User Manual page 68

Remote Controller ID
-
Up to 16 RC IDs may be configured. Up to 16 DVR consoles may be controlled by a single
remote controller. To register a remote controller, follow the instructions shown below. Point
the remote controller at the DVR. Press the ID button corresponding with the RC ID.
-
If the RC's ID and the DVR's ID match, the DVR will buzz.
-
Once the ID has been configured, the remote controller may be used.
DVR ID
This menu is used to configure a remote controller to access all of the DVR's functions. The
default value is "1". If multiple DVRs are connected to a single keyboard, there may be clashes
between channels. To avoid such clashes, assign different IDs for the devices.
DVR Alias
This menu is used to configure the DVR's name.
Playback Deinterlace
Playback deinterlacing may be set to "On" or "Off". Recording resolution must be set to Full D1
for this option to be activated. If set to "On", image instabilities in paused Full D1 images will
decrease.
Language
OSD menus support multiple languages. Select the desired device language.
Firmware Update
Save the firmware updater for USB in a USB device and connect it to the DVR. Select Firmware
Update from the System menu and press [ENTER]. When a confirmation dialogue window pops
up, select "Yes" and press [ENTER]. The product will reboot after a buzz. Firmware updaters for
USB are provided in the .dat format.
*.dat" file is provided as update firmware for USB.
To update the firmware of the DVRs through network connection, execute the updater
application and left-click the DVR to be updated from the prompted list. Once the selected
DVR's IP, MAC address and Port appear, input password assigned in SNM-128S (default value:
11111111) in the "Admin's Password" entry. Select "Starting Upgrade" to begin updating. After
upgrading, a dialogue window will pop up. Select "Yes" to reboot the product and finish the
updating process.
67
User Manual