5.2.3 Event Search
Once a time range has been set, various search parameters (All Channels, Channel, All Events,
Motion Detection, Sensor) can be used to specify search. Press the directional buttons on the
front side of the console to select the date and time. When using mouse, click the parameter to
be adjusted and use the mouse wheel. Search results will be displayed as a separate list in the
Event Search window. Select the desired data from the list and press [ENTER] or use the
mouse wheel to move to a specific time range and play the data.
Start-REC Time
End-REC Time
Search
Start Time
Search End Time
Event Channel
Event Type
5.2.4 Thumbnail Search
Select a thumbnail from a specific time frame with the up/down buttons on the front side of the
console or the mouse wheel. The search result will display in the thumbnail format. Clicking a
thumbnail will play the recording from the date and time associated with it.
: Displays the beginning of the recording.
: Displays the ending of the recording.
: Input the starting date and time to search from. Use the directional
buttons to move to the parameter to adjust and press up/down. When
using mouse, click the parameter and use the wheel to adjust date and
time.
: Input the ending date and time to search from. Use the directional
buttons to move to the parameter to adjust and press up/down. When
using mouse, click the parameter and use the wheel to adjust date and
time.
: Select the channels to search from.
SVR-3200 : ch1 - ch32
SVR-1680/1660/1645 : Ch1 - Ch16
SVR-960/945 : ch1 - ch9
: Select the event types to be searched from.
The available options are: All, MD, Sensor and V-Loss
33
User Manual