Screen Zoom; Pause Live Screen; Ptz Control - Samsung SVR-1680 User Manual

1. If Switch to Event Screen is set to Off, the Event pop-up function will not
operate.
2. If Switch to Event Screen is set to Keep, the pop-up screen will be displayed
until a button press. To return to the previous screen, press any button.
4.6

Screen Zoom

-
In single full-screen mode, press [FUNC] button, click
click to zoom in on the visual.
-
When is clicked, the screen will zoom in on the center. The zoom area can move
from left to right in 18 steps and from up to bottom in 12 steps.
-
Use direction keys to move the zoom area.
-
To return to the previous screen, press Enter or left-click the background.
4.7

Pause Live screen

-
Both live visual feed and data playback can be paused momentarily.
-
Press [PAUSE] to pause visual feed. Press [PAUSE] button again to return to visual
feed.
4.8

PTZ Control

If a PTZ controller has been connected to the DVR and the necessary
protocols have been set in "Serial" menu, real-time manipulation of
PTZ becomes enabled.
To access PTZ functions, press [PTZ] button on the front side of the
console or press [FUNC] button to cycle through available functions.
The following PTZ controllers are supported:
PTZ, Keyboard Compatible List
SDZ160/330, Samsung SPD
Keyboard SCC3000, Samsung SRX-100B
BOSCH AutoDome, TC8560X-4
PELCO(P), PELCO(D)
모델명
27
User Manual
, click + and press Enter or left-
제조사
SAMSUNG TECHWIN
BOSCH
PELCO