Axis 1611 User Manual page 28

Installation
28
AXIS CAPT Print
Monitor in
Windows 98 and
Windows Me over
NetBIOS/NetBEUI
Follow the procedures below to add printers from a Windows 98
or Windows Me workstation over NetBIOS/NetBEUI:
1. Install the AXIS CAPT Print Monitor on your workstation. The
software is available on the AXIS 1611 CD.
2. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon.
3. Click Next> in the first dialog.
4. Select Local printer as the AXIS 1611 emulates a local printer
port and click Next>
5. Choose an appropriate printer driver for your printer.
Note: If the desired printer driver appears in the manufacturer
and models list, highlight your selection, click Next> and
proceed to step 8.
6. If the desired printer driver is not available in the list, click the
Have Disk... button. Insert the printer driver CD that was
provided with your printer, select the CD drive and click OK.
7. Select the printer driver you want to install from the CD and
click Next>
8. Select the port you want to use from the Available Ports list and
click Next>.
Note: The port name is, by default, AXIS followed by the last
six digits of the AXIS 1611 serial number, e.g. (AXIS1817d0.)
9. Enter a descriptive name for your printer and click Next>
10. Click the checkbox if you want to print a test page and click
Finish.
AXIS 1611 User's Manual