Axis 1611 User Manual page 20

Installation
20
5. Next, configure the TCP/IP protocol:
Enter Frame Type used.
Enter method of setting IP address
Enter IP Address of the AXIS 1611
Enter Gateway Address used
Enter Subnet Mask used
The Broadcast Address is
filled in automatically
Note:
If you choose Disable for Frametype, your AXIS 1611 will not be
•
recognized on your network.
If you choose DHCP, IP address, Gateway address, Subnet mask and
•
Broadcast address cannot be specified.
If you can't use DHCP, choose Manual Configuration.
•
6. After you have finished the configuration, click OK.
Note:
If you get a message reading "Resetting device", click OK.
7. Click OK. Your printer's protocol configuration is now
finished and your AXIS 1611 has received an IP address.
AXIS 1611 User's Manual