Axis 1611 User Manual page 25

AXIS 1611 User's Manual
Notes:
AXIS CAPT Print
Monitor
in Windows 2000
and Windows XP
over TCP/IP
Note:
Configure Port
•
If you have changed the IP address / host name of a print server
located on a different subnet you must enter the new IP address / host
name in the Configure AXIS CAPT Port dialog.
The Configure AXIS CAPT Port dialog shows the port name and old IP
•
address / host name of the print server. Enter the new IP address / host
name of the print server and click OK.
Follow the procedure below to add printers from a Windows
2000 or XP workstation over TCP/IP:
1. Install the AXIS CAPT Print Monitor on your workstation. The
software is available on the AXIS 1611 CD.
2. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon.
3. Select Local Printer, as the AXIS 1611 emulates a local
printer port and click Next>
Make sure that the Automatically detect and install my Plug and
Play printer checkbox is not checked.
25
Installation