Axis 1611 User Manual page 17

AXIS 1611 User's Manual
Set the IP address
using DHCP
Note:
NetSpot Device
Installer software
Install NetSpot Device
Installer
Note:
If you have a DHCP server on your network, the AXIS 1611 will
automatically receive an IP address as soon as it is connected to
the network.
At least one WINS server IP address must be included in the DHCP
•
scope if you are using WINS. Immediately after the IP address has been
received, the AXIS 1611 registers its host name and IP address on the
WINS server.
NetSpot Device Installer is a utility software from Canon that
allows you to make network protocol settings for Canon devices
connected to your network. NetSpot Device Installer software is
supplied on CD-ROM with your Canon CAPT printer.
Follow these instructions to install NetSpot Device Installer:
1. In Windows 2000/XP, log on as an Administrator before
installing. Insert the CD-ROM supplied with your Canon
CAPT printer into the CD-ROM drive of your computer.
2. In Windows Explorer, double-click the CD-ROM drive icon.
3. Double-click nsdisetup.exe.
4. A license agreement will be shown in the window. Check the
contents and click Yes.
5. Specify the program destination folder and click OK. The
installation will launch.
If you check "Add to Start menu", you can add NetSpot Device Installer
to your Window's Start menu.
6. When the installation is finished, click OK. You have now
completed the installation.
17
Installation