Axis 1611 User Manual page 27

AXIS 1611 User's Manual
Important:
Notes:
If your AXIS 1611 is located on a different subnet it will not
appear in the list in the Add AXIS TCP/IP CAPT Port dialogue.
Enter the IP address of your AXIS 1611 in the empty field and
click Add.
7. Choose an appropriate printer driver for your printer.
Note: If the desired driver appears in the displayed
manufacturer and models list dialog, highlight your selection,
click Next> and proceed directly to step 10.
8. If the desired printer driver is not available, click Have Disk...
and insert the printer driver CD that was provided with your
printer. Select the CD drive and click OK.
9. Select the printer driver you want to install from the CD and
click Next>
10. Enter a descriptive name for your printer and click Next>
11. Choose whether you want to share the printer with other
network users and click Next>
12. Click the checkbox if you want to print a test page and click
Finish.
Configure Port: If you have changed the IP address / host name of a
•
print server located on a different subnet you must enter the new IP
address / host name in the Configure AXIS CAPT Port dialog.
The Configure AXIS CAPT Port dialog shows the port name and old IP
•
address / host name of the print server. Enter the new IP address / host
name of the print server and click OK.
27
Installation