Axis 1611 User Manual page 16

Installation
16
Important:
Methods for setting
the IP Address
Assigning a
Host Name
to the IP address
DO NOT use the IP addresses used in the following examples when
installing your AXIS 1611. Always consult your network administrator
before assigning an IP address to your AXIS 1611.
You can set the IP address using one of the following methods,
depending on your network environment:
Method
DHCP
NetSpot Device
Installer software
ARP/Ping
If you are using host names, you can map a unique host name to
the IP address. Refer to your system manuals or to your network
administrator for instructions on how to perform name mapping
on your system.
The AXIS 1611 supports WINS (Windows Internet Name
Service), which is recommended when you are using DHCP in a
Windows NT network.
Note:
If the host name has not been mapped to the IP address, you can still
perform the following instructions to download the IP address. In this
case, simply replace the host name entry with the IP address wherever
required.
AXIS 1611 User's Manual
Network environments
Windows 98/2000/Me/XP
Windows 98/2000/Me/XP
Windows 98/2000/Me/XP
See...
page 17
page 17
page 21