Axis 1611 User Manual page 18

Installation
18
Important:
Set the IP address
using NetSpot Device
DO NOT launch "nsdi_ipx.exe"! AXIS 1611 does not support
NetSpot Device Installer over IPX.
Follow these instructions to set the IP address using NetSpot
Device Installer:
Installer
1. Start the program. The main window will open. After a while a
list will appear of devices detected on the network.
2. Choose the AXIS 1611, which will appear as showing the
AXIS 1611 MAC address in the Device Name list:
Note:
The MAC address is based on the Serial Number (Ser. no.) of your AXIS
1611 and is printed on the underside label of the network card.
3. From the Device menu, choose Initial Settings:
AXIS 1611 MAC address
AXIS 1611 User's Manual