Axis 1611 User Manual page 24

Installation
24
Remote Printer Port
5. If the desired printer driver is not available, click the Have
Disk... button. Insert the printer driver CD that was provided
with your printer, select the CD drive and click OK.
6. Select the desired printer driver from the CD and click Next>
7. Select the TCP/IP port you wish to use and click OK.
Note: The ports will appear in the format <name>_TCP/IP.,
where <name> is, by default, AXIS followed by the last six
digits of the print server's serial number (e.g.
AXIS1817d0_TCP/IP.)
Note: If you wish to install a remote TCP/IP port (i.e. if the
TCP/IP port does not appear in the list), select the LPT1 port
and follow the Remote Printer Port instructions below.
8. Enter a descriptive name for your printer and click Next>
9. Click the checkbox if you want to print a test page and click
Finish.
1. The printer you defined above is now displayed in the printers
folder. Right-click the printer object and select Properties from
the menu.
2. Click the Details tab and click Add Port... to display the
available print server monitors.
3. Click Other, select AXIS CAPT Port and click OK.
4. Select TCP/IP as your choice of network printing protocol and
click OK.
5. Enter the IP address / host name of your print server. Click
Add.
6. The port will be added to the list and highlighted. Click OK to
return to the printer ports dialog and click Close.
AXIS 1611 User's Manual