Using Programming Shortcuts - GE 4 Series User Manual

Concord 4 Series Security Systems
3. The touchpad displays "REGULAR USER CODES" or "REG CODES." Press
display reads "SYSTEM MASTER CODE" or "SYS MASTER," then press
4. Replace the existing code with the new 4 digit System Master Code then press
* 00 #
5. Press + + to exit the programming menus.

Using Programming Shortcuts

A programming shortcut is a number that "jumps" you to a particular spot in the programming
menus.
A series of shortcut numbers takes you directly to the feature or code you want to change.
1. Enter User Programming.
Local Phone
Remote Phone Access
Touchpad
2. Enter a programming command sequence.
Time
Date
Regular User Codes
Partition Master Codes
(Concord 4 systems only)
System Master Code
Direct Bypassing Attribute
Remote Access Attribute
System Test Attribute
Latchkey Report Attribute
Partition Assign Attribute
(Concord 4 systems only)
Downloading
Touchpad Brightness
Volume
Voice Chime
# + 9 + CODE
Dial the phone number + # + CODE + # + 9 + CODE
9 + CODE
* + 020 + TTTT + #
* + 021 + DDMMYY + #
Concord 4
User 00: * + 0300000 + NNNN + # [* + 030000 + NNNN + #]
User 01: * + 0300010 + NNNN + # [* + 030001 + NNNN + #]
User 02: * + 0300020 + NNNN + # [* + 030002 + NNNN + #]
(continues up to User 229)
User 229: * + 0302290 + NNNN + #
If using alphanumeric or fixed display touchpads, use A and B to scroll
through the code attributes and change them as required.
Partition 1:* + 0310 + NNNN + #
Partition 2:* + 0311 + NNNN + #
Partition 3:* + 0312 + NNNN + #
Partition 4:* + 0313 + NNNN + #
Partition 5:* + 0314 + NNNN + #
Partition 6:* + 0315 + NNNN + #
* + 0320 + NNNN + #
* + 030NNN1 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NN1 + 1(off) or 2(on) + # (Concord Express V4)
* + 030NNN2 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NN2 + 1(off) or 2(on) + # (Concord Express V4)
* + 030NNN3 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NN3 + 1(off) or 2(on) + # (Concord Express V4)
* + 030NNN4 + 1(off) or 2(on) + # (nnn = user no.)
* + 030NN4 + 1(off) or 2(on) + # (Concord Express V4)
* + 030NNN5 + desired partitions 1-6 + # (nnn = user no.)
* + 041 + 1(off) or 2(on) + #
* + 043 + 0 through 3 + #
* + 044 + 0 through 7 + #
* + 045 + 1(off) or 2(on) + #
B
until the
#
.
#
.
Concord Express V4
(continues up to User 15)
57