Download Print this page

GE 45235 User Manual

B/w wireless camera system with monitor
Hide thumbs


Quick Links

Home Monitoring
B/W Wireless
Camera System
with Monitor
User Manual



  Related Manuals for GE 45235

  Summary of Contents for GE 45235

  • Page 1 45235 Home Monitoring B/W Wireless Camera System with Monitor User Manual 1-800-654-8483...
  • Page 2: Product Features

    Thank you for purchasing the GE 45235 B/W Wireless Camera System with Monitor. Please review these instructions carefully before attempting to operate the unit. PRODUCT FEATURES • “Wi-Fi” internet friendly wireless system—won’t interfere with home wireless networks • View up to two cameras automatically •...
  • Page 3: Before You Install

    Take care not to force the antennas past their lock positions. CHOOSING A CAMERA MOUNTING LOCATION The Wireless B/W Camera included in the 45235 system can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or outdoor use.
  • Page 4 • Do not use in wet locations. If using outside, position camera in a sheltered location. • Do not position the camera so that it points directly into the sun or any bright light, as this may cause damage to the camera. •...
  • Page 5: Connecting To The Monitor

    CONNECTING TO THE MONITOR Before beginning installation, we recommend that you temporarily “connect” the 45235 B/W Wireless Camera to the 5.5” Monitor to help familiarize yourself with the camera system and select the best location for installing the camera. The camera connects wirelessly and automatically to the monitor when both are powered on and within 200 ft.
  • Page 6: Channel Selection

    setting (1 or 2) located on the unside of the camera housing. (See Channel Selection.) 4. Brightness/Contrast and Vertical Hold can be adjusted with controls at the back of the monitor. Monitor controls Channel Selection switch CHANNEL SELECTION Manual Mode To select one of the two channels manually, press the MANUAL button on the front panel of the Monitor.
  • Page 7 Multi-Camera Operation This wireless surveillance system is designed to work with up to 2 cameras. Additional cameras are sold separately. IMPORTANT: When using more than one camera, each camera must be assigned to a specifi c channel using the channel selection switch located on the underside of the camera housing.
  • Page 8: Night Vision

    to 1/2 position. Next, press the AUTO button on the front panel of the Monitor. The green LED will light and the Monitor will automatically select between the two active cameras. The monitor will display images from both cameras alternately. Cycle Time Setting (Time interval between camera selections) The default cycle time for the receiver is preset to...
  • Page 9: Installation

    enough light, color will return to the images. AUDIO DETECTION AND NOTIFICATION FEATURE This feature allows the system to emit an audio alert whenever sound is detected within a monitored area. When the camera detects a sound, the receiver will sound an alert and ‘Alarm’...
  • Page 10: Desktop Mount

    Desktop Mount: 1. Place camera in desired location on a fl at surface. 2. Set Channel switch on camera to 1 or 2. 3. Reconnect AC adapter to the camera and power on the monitor. 4. Adjust antenna and camera angle as needed for the clearest picture.
  • Page 11 4. Adjust antenna and camera angle as needed for the clearest picture. USING THE 45235 B/W WIRELESS CAMERA MONITOR SYSTEM WITH A You can connect the 45235 Monitor to a – –...
  • Page 12: Troubleshooting

    OPTIONAL WIRELESS BATTERY PACK AVAILABLE (SOLD SEPARATELY) Rechargeable NiMH Battery is available for use with the 45235 Wireless B/W Camera. This 850mAh battery will power the wireless Camera for approximately 5 hours on a single charge. To order this battery, please visit batteryoffer or call our Customer Support department at 1-800-654-8483, Monday–Friday...
  • Page 13 No camera picture 1. Check all connections. Make sure camera(s) and receiver are powered ON. 2. Ensure camera(s) and receiver are set to correct channel(s). 3. Make sure camera is within range of receiver. 4. Adjust the antennas of the monitor and camera(s). Blank monitor 1.
  • Page 14: Audio Problems

    5. Adjust the antennas of the monitor and camera(s). Audio problems 1. Ensure the volume is turned up suffi ciently on the Monitor (or TV). 2. Make sure the sound is within the microphone range. 3. If the unit emits a loud wailing sound (feeds back), try moving the camera away from the monitor or angle the monitor in a different direction.
  • Page 15: Warranty

    Output ...Audio/Video Overall Size ...5.7” W x 7.28” H x 8.46” D WARRANTY ONE-YEAR LIMITED WARRANTY: Jasco Products Company warrants this product to be free from manufacturing defects for a period of one year from the original date of consumer purchase.
  • Page 16: Fcc Statement

    - Consult the dealer or an experienced radio/TV technician for help. Made in China is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114