Commands At A Glance - GE 4 Series User Manual

Commands at a Glance

Disarm the system.
Cancel an accidental alarm.
Arm to Level 2—STAY.*
Arm to Level 3—AWAY.*
Send a police alarm.
Send an auxiliary alarm.
Send a fire alarm.
Arm system with No Delay.*
Arm system for Latchkey.*
Bypass a sensor.*
Arm system silently.*
Arm system with exit lights
off.*
Turn all lights on/off.
Turn specific lights on/off.
Check the system status.
Turn Chime on/off.
Turn Energy Saver on/off.
Disable local phone access.**
(This is a phone command
only.)
Check alarm memory.
Activate Output.***
View Event History
*If Quick Arm feature is on, access code is not required. See "Arming Your System".
**Installer can disable local phone control if desired.
***Must be set up by installer.
1 CODE
+
CODE or 1 CODE
+
2 CODE
+
3 CODE
+
Press and hold both POLICE buttons for
2 seconds.
Press and hold both AUXILIARY
buttons for 2 seconds.
Press and hold both FIRE buttons for 2
seconds.
8573G51A.D
2 CODE 4
+ + or
3 CODE 4
+ +
2 CODE 6
+ + or
3 CODE 6
+ +
2 CODE
Indirectly: + +
3 CODE
+ +
# CODE
Directly: + + Sensor Number
5 2 CODE
+ + or
5 3 CODE
+ +
2 CODE 0
+ + or
3 CODE 0
+ +
0 0
+
0
+ Light number
* * *
for Short status or +
7 1
+
7 2
+
# 7 3
+ +
or wait 5 seconds after picking up the phone
7 6
+
7 7
+ + Output number (1–6)
8 CODE 8
+ +
#
or
#
for Full status