To Change The System Master Code - GE 4 Series User Manual

Note
Step 10 can only be per-
formed on Concord 4 sys-
tems using the System
Master Code.
Note
The system will not accept
the same code for two differ-
ent users.
56
B
3. Press until the touchpad displays the type of code you wish to change (Regular User codes,
Partition Master Codes, or System Master code), then press
change a Regular User code, press
CODES" or "REG CODES."
B
4. Press until the touchpad displays the user code you wish to change, then press
ple, if you want to change Regular User code 2, press
02" or "REG CODE 02."
5. Enter the new code and press
B
6. Press . "DIRECT BYPASSING" or "BYPASS" appears:
1 #
Press + to turn the option off for this user code.
2 #
Press + to turn the option on for this user code.
B
7. Press . "REMOTE ACCESS" or "REMOTE" appears:
1 #
Press + to turn the option off for this user code.
2 #
Press + to turn the option on for this user code.
B
8. Press . "SYSTEM TESTS" or "TESTS" appears:
1 #
Press + to turn the option off for this user code.
2 #
Press + to turn the option on for this user code.
B
9. Press . "LATCHKEY REPORT" or "LATCH" appears:
1 #
Press + to turn the option off for this user code.
2 #
Press + to turn the option on for this user code.
B
10. Press . "PARTITION ASSIGN" or "P" appears:
Enter the desired partition numbers (1-6) for this user code.
* B
11. Press + to move to the next user code, or
To erase a user code:
1. Enter the programming menus by pressing
B
2. Press until the touchpad displays "USER CODES," then press
3. The touchpad displays "REGULAR USER CODES" or "REG CODES." Press
not delete the System Master code.)
B
4. Press until the touchpad displays the user code you wish to erase, then press
ple, if you want to change User code 4, press
"REG CODE 04."
5. Enter the System or Partition Master code you used in Step 1 and press
appears as "USER 04 ****" or "RG 01 ––––," for example.
* B
6. Press + to move to the next user code, or
To change or delete the Partition Master Code:
1. Enter the programming menus by pressing
B
2. Press until the touchpad displays "USER CODES," then press
3. The touchpad displays "REGULAR USER CODES" or "REG CODES." Press
display reads "PARTITION MASTER CODE" or "PTN MASTER," then press
4. Enter the System Master Code to delete the existing Partition Master Code
OR enter a new 4 digit Partition Master Code to replace the existing code, then press
* 00 #
5. Press + + to exit the programming menus.

To change the System Master Code:

1. Enter the programming menus by pressing
B
2. Press until the touchpad displays "USER CODES," then press
#
when the touchpad displays "REGULAR USER
#
when the touchpad displays "USER
#
.
* 00 #
+ +
9
+ System or Partition Master
#
when the touchpad displays "USER 04" or
* 00 #
+ +
9
+ System or Partition Master
9
+ System Master
#
. For example, if you want to
#
. For exam-
to exit the programming menus.
CODE
.
#
.
#
. (You can-
#
. For exam-
#
. The deleted code
to exit the programming menus.
CODE
.
#
.
B
until the
#
.
CODE
.
#
.
Concord 4 Series Security Systems
#
.