Using A Touchtone Phone To Operate Your System; Phone Command Prefix; Accessing The System From Off-Site - GE 4 Series User Manual

Using a
Touchtone
Phone to
Operate Your
System
34
Detail Screen Display
U600 - U829
U830 - U835
U838 - U843
U846
U847
U848
U849
U850
U851
U852
Source information is shown in the following table.
Detail Screen Display
S00
S01
S02
S06
S07
S08
S09
S1xx (xx = Zone Number)
S1xx (xx = Zone Number)
S3xx (xx = Bus Unit Number)
S6xx (xx = Bus Unit Number)
Your system may be equipped with an option that allows system operation from a Touchtone
phone, on or off the premises.
This option enables programmed text to be spoken through the phone and/or broadcast through
interior speakers. Except for custom words, the voice speaks the text that appears on alphanu-
meric touchpads in the system.

Phone Command Prefix

What distinguishes a call to the panel from any other out-going or incoming call is the use of the
Phone Command Prefix:
• In the case of on-site operation, if the Phone Command Prefix is dialed first (within 5 seconds
of picking up the phone), the panel waits for a valid access code or command.
• If the system is being accessed remotely, the Phone Command Prefix is used in conjunction
with the access code.
#
The prefix is usually , but can be changed to
*
use as the first key you press instead of

Accessing the System from Off-site

To access the system from off-site, the system needs to recognize two things about the call:
• The panel needs to recognize that it should answer the phone.
• The panel needs to recognize that the code entered has the authority to operate the system
from off-site.
Regular User Codes 000 - 229
Partition Master Codes 1 - 6
Partition Duress Codes 1 - 6
System Master Code
Installer Code
Dealer Code
AVM Code
Quick Arming
Keyswitch Arming
System
Source
Premise Phone
Phone During Conversation
Remote Phone
Auto Stay Arming
Automation Module
Keyswitch Arming Zone
System
Keychain Touchpad
Wireless Touchpad
Alphanumeric Touchpad
Fixed Display Touchpad
*
by the installer. If your prefix has been changed,
#
.
Concord 4 Series Security Systems
User