Change Master/User Code - GE Simon XT User Manual

User codes 1 to 8. There are eight user codes, which can be used for many user
operations, but not subdisarming, programming, or bypassing sensors. Initially, all
user codes are blank. A user code can be deleted by pressing Disarm while the
code is being changed.
Duress code. The duress code, when used in place of another user code,
generates a silent duress alarm that is reported to the central monitoring station.
Initially, the duress code is blank. The duress code can be deleted by pressing
Disarm while the code is being changed.
To change the master code:
1. Enter the System Programming menu.
2. Scroll until the display shows Access Codes, and then press OK.
3. Scroll until the display shows Master Code, and then press OK. The current
value of the code flashes.
4. Enter a new code (use the correct length), and then press OK.
5. Press Status repeatedly to exit.
To change the a user code:
1. Enter the System Programming menu.
2. Scroll until the display shows Access Codes, and then press OK.
3. Scroll to the user code you want to change, and then press OK. The current value
of the code flashes.
4. Enter a new code (use the correct length), and then press OK.
5. Press Status repeatedly to exit.
To change the duress code:
1. Enter the System Programming menu.
2. Scroll until the display shows Access Codes, and then press OK.
3. Scroll until the display shows Duress Code, and then press OK. The current
value of the code flashes.
4. Enter a new code (use the correct length), and then press OK.
5. Press Status repeatedly to exit.
Security
The Security menu contains the download enable option. This option determines
whether your dealer can access the system remotely.
Simon XT User Manual 23