ADTRAN NetVanta 1235P Hardware Installation Manual page 27

NetVanta 1235P Hardware Installation Guide
Environmental
• Operating Temperature: 0°C to 40°C
• Storage Temperature: -20°C to 70°C
• Relative Humidity: Up to 95 percent, noncondensing
Physical
• Dimensions: 3.50-inch W x 2.00-inch H x 1.12-inch D
NetVanta ActivReach Media Converter intended for use only with the NetVanta 1235P
ActivReach Ethernet Switch (P/N 1702595G10).
• The NetVanta ActivReach Media Converter is intended for intrabuilding use only.
• Ethernet cables are intended for intrabuilding use only. Connecting an ADTRAN
unit directly to Ethernet cables that run outside the building in which the unit is
housed will void the user's warranty and could create a fire or shock hazard. To
connect an ADTRAN unit to Ethernet cables that run outside the building,
ADTRAN's ActivReach Ethernet Port Protection Device (EPPD)
(P/N 1700595G16) must be connected between the unit and the outside plant
cable. Use of any Ethernet protector other than ADTRAN's for this purpose will
void the user's warranty.
• PoE cables are intended for intrabuilding use only. Connecting an ADTRAN PoE
unit directly to PoE cables that run outside the building in which the unit is housed
will void the user's warranty and could create a fire or shock hazard.
• For outdoor PoE applications, ensure any PoE injector used is approved and
rated for outdoor/exposed wiring applications. Use of a PoE injector that is not
rated for outdoor/exposed wiring applications will void the user's warranty and
could create a fire or shock hazard.
For more information and help installing your NetVanta ActivReach product, go to
http://www.adtran.com/activreach-help.
61700595G10-34A Copyright © 2013 ADTRAN, Inc.
Unit Installation
27