Loading the Navigation System Software
To install the Navigation System Software on your Desktop:
1.
Synchronize the iPAQ PocketPC with your computer using ActiveSync.
For information on synchronizing your PC, refer to the iPAQ User's Guide.
2.
Connect the iPAQ PocketPC to your computer using the iPAQ cradle or synchronization cable.
3.
Close all other applications running on the Desktop and Pocket PC.
4.
Obtain the two Navigation System installation discs.
5.
Insert Disk 1 in the CD drive.
The Installer should start immediately. If the setup program does not auto-
matically start, click on the Start tab and select the Run option. Type the fol-
lowing in the dialog box: D:\setup.exe and click on the OK button. Follow
the directions in the dialog boxes.
6.
Click on the Next button on the Welcome to Install Shield Wizard window.
Read through the End User License Agreement.
7.
Click on the Yes button if you accept the License Agreement terms.
Setup installs the Navigation System files onto your computer.
8.
Click on the Finish button.
User's Guide
Loading the Navigation System Software
1-4