Using The Navigation System; Entering A Start Location - HP 348773-001 User Manual

Using The Navigation System

The Navigation System is designed to guide you to your destination in the most efficient manner.
Easy-to-use- features let you:
Enter a Destination by address, intersection, point of interest, favorite location, or a recent location.
Set up Stopovers along the route.
Indicate areas to avoid along the route.
The calculated route for a destination displays in blue on the map. If you miss a turn in the
route, Navigation System recalculates the route and briefly displays "Recalculating Route"
on the map display.
Before Using the System:
Clock and time settings are accurate by tapping Start >Settings >System>Clock.
Bluetooth GPS Device is on by tapping the Bluetooth icon at the bottom of the Start
screen.

Entering a Start Location

The Navigation System defaults to the current location as the starting point for route calculation, as
specified by the GPS signal. You can enter a start location if you are not connected to a GPS
receiver, do not have a GPS signal, or want another point of origin.
To enter a start location, do one of the following:
Tap and hold the pointer on the map location. A pop up menu with the selected address displays.
Tap the Set Start Location option on the pop up menu.
You can pan the map to the location by moving the map with the pointer.
Tap the Menu button > Destinations icon. Enter the destination information. For more informa-
tion, refer to the Entering a Destination section.
User's Guide 4-1