Closing The Navigation System - HP 348773-001 User Manual

Closing the Navigation System

When you open Navigation System, it runs in the background of your iPAQ PocketPC. To stop it
from running in the background, you should manually close it.
If you do not manually close Navigation System, your iPAQ PocketPC may
freeze when it is switched off. You must perform a soft reset before you can
switch the iPAQ PocketPC on, again. This procedure does not harm any data
or settings.
To manually close Navigation System:
1. Tap the blue x in the upper right corner of the map.
2. Tap Start >Settings.
3. Tap the System tab at the bottom of the screen.
4. Tap the Memory icon on the System screen.
The Memory screen displays.
5. Tap the Running Programs tab at the bottom of the Memory screen.
The Running Programs list displays.
6. Tap iPAQ Navigation System in the list.
7. Tap the Stop button.
8. Close your iPAQ PocketPC.
User's Guide
Closing the Navigation System
Downloading Additional Maps
1-8