QMS Magicolor 2 plus Manual page 25

—
 !   "
1 Access the Administration/Miscellaneous/New System Image menu.
Menu
Choices
Default
2 Select Yes in the New System Image menu.
The printer automatically reboots and waits for the new system software (image)
to be sent via your PC's parallel port.
3 Send the new system image to the printer.


Type
copy /b *.dl lpt #
where # is 1 to 3. (/b refers to binary files.)
» Note: In some cases, the extension to the file may be ps.
4 While the system software is loading, the Online LED blinks off and on, and
the message window displays
Downloading image
via parallel port.
5 After the new system software has been written to ROM, the printer reboots
itself to activate the new system software.
» Note: The new system image doesn't erase the old image until the printer verifies
that the new image is valid.
6 Print another advanced status page, and verify that the configuration set-
tings are the same.
—
Administration/Miscellaneous/New System Image
Yes—Download new system code
No—Don't download new system code
No
 !! !
—