Configure Settings - Dell 3110CN Owner's Manual

Select Dell from Printer Model, and confirm Dell Laser Printer 3110cn is selected for
2.
the Model Name. If it is not selected, select it.
NOTE:
specify it.
Click Add.
3.
When Using Rendezvous
NOTE:
printer must have the same segment to use Rendezvous.
Turn on the printer.
1.
Connect the LAN cable between the printer and the network.
2.
NOTE:
Start the Print Center (or Printer Setup Utility), and click Add from the Printer List dialog
3.
box.
Click Default Browser on the Printer Browser dialog box and select the printer that is
4.
connected via the Rendezvous connection. Then, click Add.
NOTE:
Specify the options to have been installed to the printer, and then click Continue.
5.
Confirm that the printer is displayed on the Printer List dialog box.
6.

Configure Settings

All the optional accessories are verified as installed.
Mac OS X 10.3 or Later Version(s)
Start the Printer Setup Utility.
1.
On the Printer List dialog box, select the printer to be configured.
2.
Click Show Info.
3.
Select Installable Options, and select the options that have been installed on the printer,
4.
then click Apply Changes.
NOTE:
You do not have to change the settings. However, you must configure the settings if you are using Mac
OS 10.3 and a USB cable.
NOTE:
Mac OS X 10.3 when a USB cable is connected to your computer.
54
Installing the PPD File on Macintosh Computers
When printing is set up using IP printing, the queue name is displayed as blank. You do not need to
A multi protocol card must be installed and the IP addresses for the Macintosh computer and the
The Macintosh computer must be connected to the network in advance.
When using Mac OS X 10.2.8, you can find Print Center in the Utilities folder in Applications.
When using a USB cable and AppleTalk, the installable options settings are automatically set up.
You must configure the print queue that was automatically created on a non-English version of