Dell 3110CN Owner's Manual page 39

Right-click Wireless Network Connection and select Properties.
b.
Select the Wireless Networks tab.
c.
Make sure the check box for Use Windows to configure my wireless network settings is
d.
checked.
NOTE:
Be sure to write down the current wireless computer settings in steps d and f so that you
can restore them later.
Click the Advanced button.
e.
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog
f.
box.
Click the Add button to display Wireless network properties.
g.
Under the Association tab, enter the following information and click OK.
h.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: checked
Click the Move up button to move the newly added SSID to the top of the list.
i.
Click OK to close the Property dialog box.
j.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
Check the IP address assigned by AutoIP on the printer.
2.
e.g.: 168.254.1.1
Check that the IP address on your computer is assigned by DHCP.
3.
Open Dell Printer Configuration Web Tool using WEB browser.
4.
e.g.: http://168.254.1.1/
Change the wireless setting of the printer on Dell Printer Configuration Web Tool.
5.
Reboot the printer.
6.
Restore the wireless setting on your computer.
7.
Select Network Connections from Control Panel.
a.
Right-click Wireless Network Connection and select Properties.
b.
Select Wireless Network tab.
c.
Click Advanced.
d.
Do either of the following:
e.
When wireless ad-hoc mode is set to the printer:
Setting up Network Printing
39