Selecting Pre-Punched Paper; Transparencies - Dell 3110CN Owner's Manual

Print media source
Multipurpose feeder

Selecting Pre-punched Paper

Pre-punched paper brands can differ in the number and placement of holes and in manufacturing
techniques. However, it may not be possible to print on the paper to depending on the placement
of holes on the paper.
To select and use pre-punched paper:
• Test paper from several manufacturers before ordering and using large quantities of pre-
punched paper.
• Paper should be punched at the paper manufacturer and not drilled into paper already
packaged in a ream. Drilled paper can cause jams when multiple sheets feed through the
printer. This may result in a paper jam.
• Pre-punched paper can include more paper dust than standard paper. Your printer may
require more frequent cleaning and feed reliability may not be as good as standard paper.
• Weight guidelines for pre-punched paper are the same as non-punched paper.

Transparencies

You can load up to 75 sheets of transparencies in the multipurpose feeder for a single print job.
Before buying large quantities of any print media, Dell recommends trying a sample first.
When printing on transparencies:
• Set the paper type to Transparency from the printer driver to avoid damaging your printer.
• Use transparencies designed specifically for laser printers. Do not use regular transparencies.
Transparencies must be able to withstand temperatures of 205°C (401°F) without melting,
discoloring, offsetting or releasing hazardous emissions.
Print side
Face down
Page orientation
Letterhead enters
the printer first
Print Media Guidelines
15