Dell 3110CN Owner's Manual page 41

Set the IP address on the printer.
3.
e.g.: 1.2.3.5
Open Dell Printer Configuration Web Tool using WEB browser.
4.
e.g.: http://1.2.3.5/
Change the wireless setting of the printer on Dell Printer Configuration Web Tool.
5.
Reboot the printer.
6.
Restore the wireless setting on your computer.
7.
Select Network Connections from Control Panel.
a.
Right-click Wireless Network Connection and select Properties.
b.
Select Wireless Network tab.
c.
Click Advanced.
d.
Do either of the following:
e.
When wireless ad-hoc mode is set to the printer:
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog
box.
When wireless infrastructure mode is set to the printer:
Select Access point (Infrastructure) networks only and close the Advanced dialog box.
Select the setting that you send to the printer in the list in Preferred Network group.
f.
Click Move up to move the setting to the top of the list.
g.
Click OK to close the Property dialog box.
h.
NOTE:
When your operating system is earlier than Windows 2000, create settings according to the
manual of the wireless setting tool provided by your wireless device manufacturer.
Scene 2. Construct new wireless network environment for both computer and printer (When wireless
setting needs to be set to your computer)
For DHCP network:
Create wireless setting of your computer following the steps below.
1.
Select Network Connections from Control Panel.
a.
Right-click Wireless Network Connection and select Properties.
b.
Select the Wireless Networks tab.
c.
Make sure the check box for Use Windows to configure my wireless network settings is
d.
checked.
Setting up Network Printing
41