Before You Start; Your Hp Storageworks Tape Drive; Front View Of Ultrium External Tape Drive - HP StorageWorks User Manual

1 Before you start

In this chapter:
"Your HP StorageWorks tape
"Refer to
"Which operating systems are
"Power specifications" on page 14
"How do I connect the drive to my
"Using the HP StorageWorks Tape

Your HP StorageWorks tape drive

This guide describes how to install and operate the following HP StorageWorks Ultrium tape drives:
HP StorageWorks LTO-5 Ultrium 3000 internal and external tape drives
HP StorageWorks LTO-4 Ultrium 1760 internal and external tape drives
HP StorageWorks LTO-3 Ultrium 920 internal and external tape drives
HP StorageWorks LTO-2 Ultrium 448 internal and external tape drives
For a detailed product specification, please refer to our World Wide Web site
go/tape).
1. Cartridge door
2. On/Off switch (external drives only)
3. Encryption LED (only on Ultrium 3000 tape drives)
4. Clean LED
Figure 1 Front view of Ultrium external tape drive
.
drive" on page 13
www.hp.com/go/connect" on page 14
supported?" on page 14
server?" on page 14
CD-ROM" on page 16
5. Tape LED
6. Drive LED
7. Ready LED
8. Eject button
Ultrium Half-Height SAS Tape Drives
(http://www.hp.com/
13