Printing With Custom Size Pages; Source; Copies - Kyocera TASKalfa 6501i User Manual

Basic
2
3
4
5
6

Printing with Custom Size Pages

1
2
3
4

Source

Copies

5-2
In the Page Sizes dialog box, click New.
A default custom name appears in the Name box. Type a name for your custom
page size.
Type or select values for the height and width. If the height or width value
exceeds the allowable limit, it automatically adjusts to the limit after Apply or
OK is clicked.
When finished, click Apply.
Click OK to close the Page Sizes dialog box.
The custom page size appears in the Print size list, which is used for enlarging
and reducing the sizes of prints.
To delete a custom page size from the Page Sizes dialog box, select the name
of the custom page size and then click Delete.
Load custom-sized paper into the MP tray.
In the Basic tab, select the name of your custom page size in the Print size list.
Click OK to return to the Print dialog box.
Click OK to start printing.
Source specifies the tray or cassette that supplies paper for a print job. The
default is Auto source selection, which instructs the printer to search for the
media requested by the application or the printer driver. If the selected tray or
cassette empties during a print job, then the printer searches for another
source, and continues the job.
Some media types, such as transparencies, labels, envelopes, and tab divider
sheets must be supplied from the MP tray. Ensure that the paper is properly
loaded by following the instructions outlined in the printing system's Operation
Guide.
Note: Source and Media type are separate items in the dialog box, but can
be combined using the Combine source and media type lists setting in
Device Settings > Compatibility. If they are combined, Media type is
unavailable on the Basic tab, and media types can be selected in the Source
list.
This setting specifies the number of copies to print. You can print up to 999
copies. For some models, the maximum is 9,999.
User Guide