Express Install; Installing With Express Install - Kyocera TASKalfa 6501i User Manual

Express Install

Installing with Express Install

1
2
3
4
5
6
Printer Driver
lowers costs by reducing the amount of paper that must be purchased. We
recommend that printing systems capable of duplex printing use duplex mode
by default. This can be set in the printer driver installation process for European
locations only.
After you click Express mode or Custom mode in the Installer, if the operating
system locale is EU and time zone is GMT 0, GMT +1 or GMT +2, a message
about resource and energy conservation appears. Read the message, and then
click OK.
After installation is successful, an Enable Duplex check box is displayed on the
Finished page. Select the check box to have the driver automatically default to
duplex mode. Exceptions to the default can afterward be made by selecting
options in the driver Quick Print or Basic tabs.
Express Install refers to quick device, driver, and utility installation for a USB or
network connection. The installation application discovers printing devices that
are turned on, and connected by USB or network cable. One or more feature
packages can be installed together.
This section describes the express installation procedure of devices, drivers,
and utilities in Windows operating systems.
If the installer cannot find your printing device, contact your system
administrator.
Ensure that your printing device and computer are turned on and connected by
USB or network cable.
When the installer starts, Express Install is displayed as the default window if
there are no software upgrades waiting. Otherwise click the Express Install
button to return here from other windows.
In the Express Install window, the installer looks for your printing device. Each
discovered device is displayed in the device list as an icon with a model name
and location (USB port or IP address).
If your device is discovered, select your model in the device list.
If discovery does not find your device, remove and reinsert the USB or network
cable, and ensure that it is connected properly. Click the circular arrow icon to
refresh the discovery.
You can also find a device by typing a partial or full search term in the search
text box above the device list. You can search the discovered devices by model
name, IP address, or USB port. The results are displayed in the device list. If the
search finds your device, select it. Click the x icon to clear the text box, and
return to the list of all discovered devices.
You can select Use host name as port name to use a host name for the
Standard TCP/IP port. (Not available with a USB connection.)
The installer automatically selects the packages in the feature list. Or you can
click each to switch between clearing and selecting. Move the pointer over a
product icon to see a description of the contents.
Installation
1-2